Irori Dining Set
Irori dining table is made of Paulownia wood fired on surface.
In Japan, Paulownia wood has been used for chest of drawers since ancient times.
Craftsmen have created masterpieces from wood that was carefully selected.
Here is the Highest class IRORI by the technique that has been making Paulownia wood furniture.
Feel the warmth of IRORI
Japanese Traditional Table
We used a single Paulownia wooden plate (70mm thick) air-dried thoroughly, and we kept natural grains as much as possible.
Its surface was burned till it become black, then UZUKURI finish (brushing with a tool made of bundled roots of Themeda triandra) and waterproof finish. So, it is difficult to absorb the moisture, and almost can not stain.
You can use this table in safety because we use a clean and heat-resistant Stainless steel for RO, the center of the table. As there is a hole for power code, you can use induction heater, electric griddle and gas stove.
It becomes an ordinary table when you cover RO with a lid of accessories if you don’t need RO.It is easy to assemble the table.With two drawers.
If you remove the legs, the table becomes a low table.
It is made by luxuriously peeling 2 to 3 pieces of paulownia wood (thickness about 70 mm) that has been naturally dried to the side. In order to make it feel as natural as possible, we make the best use of the wood surface and finish it in the same way as when the skin is removed.
The surface is finished with a brush that bundles the roots of grilled torreya until it turns black, and is waterproofed. Therefore, it is difficult to absorb water and there is almost no possibility of stains.
The furnace is made of luxuriously circular stainless steel and is safe because it has excellent cleanliness and heat resistance. In addition, for those who cannot use charcoal fire, we have installed a window for the cord to pass through, so you can enjoy electric IH heaters, hot plates, gas stoves, etc. without putting them on the table so that the cord does not get in the way.
You can also make it flat by closing the furnace with the attached lid.
It is easy to assemble, and it is convenient when moving because it is separated into the top plate, upper leg, and lower leg. There are two drawers on the lower leg, and the shelf board that connects the main leg and the auxiliary leg can be used as a storage shelf.
As for functionality, the legs have two layers, so you can lower it one step and use it as a table in a Japanese-style room.